Attachment 4001 Details for Bug 6202 – /etc/samba/smb.conf

/etc/samba/smb.conf

smb.conf (text/plain), 11.00 KB, created by Wolfgang Sailer on 2009-03-21 04:33:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Wolfgang Sailer

Created: 2009-03-21 04:33:34 UTC

Size: 11.00 KB

patch

obsolete

>sulla@freedom:~$ cat /etc/samba/smb.conf
>#
># Sample configuration file for the Samba suite for Debian GNU/Linux.
>#
>#
># This is the main Samba configuration file. You should read the
># smb.conf(5) manual page in order to understand the options listed
># here. Samba has a huge number of configurable options most of which
># are not shown in this example
>#
># Any line which starts with a ; (semi-colon) or a # (hash)
># is a comment and is ignored. In this example we will use a #
># for commentary and a ; for parts of the config file that you
># may wish to enable
>#
># NOTE: Whenever you modify this file you should run the command
># "testparm" to check that you have not made any basic syntactic
># errors.
>#
>
>#======================= Global Settings =======================
>
>[global]
>
>## Browsing/Identification ###
>
># Change this to the workgroup/NT-domain name your Samba server will part of
>   workgroup = HOME_NETWORK
>
># server string is the equivalent of the NT Description field
>   server string = %h server (Samba, Ubuntu)
>
># Windows Internet Name Serving Support Section:
># WINS Support - Tells the NMBD component of Samba to enable its WINS Server
>;   wins support = no
>
># WINS Server - Tells the NMBD components of Samba to be a WINS Client
># Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
>;   wins server = w.x.y.z
>
># This will prevent nmbd to search for NetBIOS names through DNS.
>   dns proxy = no
>
># What naming service and in what order should we use to resolve host names
># to IP addresses
>;   name resolve order = lmhosts host wins bcast
>
>#### Networking ####
>
># The specific set of interfaces / networks to bind to
># This can be either the interface name or an IP address/netmask;
># interface names are normally preferred
>;   interfaces = 127.0.0.0/8 eth0
>
># Only bind to the named interfaces and/or networks; you must use the
># 'interfaces' option above to use this.
># It is recommended that you enable this feature if your Samba machine is
># not protected by a firewall or is a firewall itself.  However, this
># option cannot handle dynamic or non-broadcast interfaces correctly.
>;   bind interfaces only = true
>
>
>
>#### Debugging/Accounting ####
>
># This tells Samba to use a separate log file for each machine
># that connects
>   log file = /var/log/samba/log.%m
>
># Put a capping on the size of the log files (in Kb).
>   max log size = 1000
>
># If you want Samba to only log through syslog then set the following
># parameter to 'yes'.
>;   syslog only = no
>
># We want Samba to log a minimum amount of information to syslog. Everything
># should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
># through syslog you should set the following parameter to something higher.
>   syslog = 0
>
># Do something sensible when Samba crashes: mail the admin a backtrace
>   panic action = /usr/share/samba/panic-action %d
>
>
>####### Authentication #######
>
># "security = user" is always a good idea. This will require a Unix account
># in this server for every user accessing the server. See
># /usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html
># in the samba-doc package for details.
>   security = user
>
># You may wish to use password encryption.  See the section on
># 'encrypt passwords' in the smb.conf(5) manpage before enabling.
>   encrypt passwords = true
>
># If you are using encrypted passwords, Samba will need to know what
># password database type you are using.
>   passdb backend = tdbsam
>
>   obey pam restrictions = yes
>
>;   guest account = nobody
>   invalid users = root
>
># This boolean parameter controls whether Samba attempts to sync the Unix
># password with the SMB password when the encrypted SMB password in the
># passdb is changed.
>;   unix password sync = no
>
># For Unix password sync to work on a Debian GNU/Linux system, the following
># parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
># sending the correct chat script for the passwd program in Debian Sarge).
>   passwd program = /usr/bin/passwd %u
>   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
>
># This boolean controls whether PAM will be used for password changes
># when requested by an SMB client instead of the program listed in
># 'passwd program'. The default is 'no'.
>;   pam password change = no
>
>########## Domains ###########
>
># Is this machine able to authenticate users. Both PDC and BDC
># must have this setting enabled. If you are the BDC you must
># change the 'domain master' setting to no
>#
>;   domain logons = yes
>#
># The following setting only takes effect if 'domain logons' is set
># It specifies the location of the user's profile directory
># from the client point of view)
># The following required a [profiles] share to be setup on the
># samba server (see below)
>;   logon path = \\%N\profiles\%U
># Another common choice is storing the profile in the user's home directory
>;   logon path = \\%N\%U\profile
>
># The following setting only takes effect if 'domain logons' is set
># It specifies the location of a user's home directory (from the client
># point of view)
>;   logon drive = H:
>;   logon home = \\%N\%U
>
># The following setting only takes effect if 'domain logons' is set
># It specifies the script to run during logon. The script must be stored
># in the [netlogon] share
># NOTE: Must be store in 'DOS' file format convention
>;   logon script = logon.cmd
>
># This allows Unix users to be created on the domain controller via the SAMR
># RPC pipe.  The example command creates a user account with a disabled Unix
># password; please adapt to your needs
>; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
>
>########## Printing ##########
>
># If you want to automatically load your printer list rather
># than setting them up individually then you'll need this
>;   load printers = yes
>
># lpr(ng) printing. You may wish to override the location of the
># printcap file
>;   printing = bsd
>;   printcap name = /etc/printcap
>
># CUPS printing.  See also the cupsaddsmb(8) manpage in the
># cupsys-client package.
>;   printing = cups
>;   printcap name = cups
>
># When using [print$], root is implicitly a 'printer admin', but you can
># also give this right to other users to add drivers and set printer
># properties
>;   printer admin = @lpadmin
>
>
>############ Misc ############
>
># Using the following line enables you to customise your configuration
># on a per machine basis. The %m gets replaced with the netbios name
># of the machine that is connecting
>;   include = /home/samba/etc/smb.conf.%m
>
># Most people will find that this option gives better performance.
># See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
># for details
># You may want to add the following on a Linux system:
>#         SO_RCVBUF=8192 SO_SNDBUF=8192
>;   socket options = TCP_NODELAY
>
># The following parameter is useful only if you have the linpopup package
># installed. The samba maintainer and the linpopup maintainer are
># working to ease installation and configuration of linpopup and samba.
>;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
>
># Domain Master specifies Samba to be the Domain Master Browser. If this
># machine will be configured as a BDC (a secondary logon server), you
># must set this to 'no'; otherwise, the default behavior is recommended.
>;   domain master = auto
>
># Some defaults for winbind (make sure you're not using the ranges
># for something else.)
>;   idmap uid = 10000-20000
>;   idmap gid = 10000-20000
>;   template shell = /bin/bash
>
>#======================= Share Definitions =======================
>
># Un-comment the following (and tweak the other settings below to suit)
># to enable the default home directory shares.  This will share each
># user's home directory as \\server\username
>;[homes]
>;   comment = Home Directories
>;   browseable = no
>
># By default, \\server\username shares can be connected to by anyone
># with access to the samba server.  Un-comment the following parameter
># to make sure that only "username" can connect to \\server\username
>;   valid users = %S
>
># By default, the home directories are exported read-only. Change next
># parameter to 'yes' if you want to be able to write to them.
>;   writable = no
>
># File creation mask is set to 0600 for security reasons. If you want to
># create files with group=rw permissions, set next parameter to 0664.
>   create mask = 0664
>
># Directory creation mask is set to 0700 for security reasons. If you want to
># create dirs. with group=rw permissions, set next parameter to 0775.
>   directory mask = 0775
>
># Un-comment the following and create the netlogon directory for Domain Logons
># (you need to configure Samba to act as a domain controller too.)
>;[netlogon]
>;   comment = Network Logon Service
>;   path = /home/samba/netlogon
>;   guest ok = yes
>;   writable = no
>;   share modes = no
>
># Un-comment the following and create the profiles directory to store
># users profiles (see the "logon path" option above)
># (you need to configure Samba to act as a domain controller too.)
># The path below should be writable by all users so that their
># profile directory may be created the first time they log on
>;[profiles]
>;   comment = Users profiles
>;   path = /home/samba/profiles
>;   guest ok = no
>;   browseable = no
>;   create mask = 0600
>;   directory mask = 0700
>
>;[printers]
>;   comment = All Printers
>;   browseable = no
>;   path = /tmp
>;   printable = yes
>;   public = no
>;   writable = no
>;   create mode = 0700
>
># Windows clients look for this share name as a source of downloadable
># printer drivers
>;[print$]
>;   comment = Printer Drivers
>;   path = /var/lib/samba/printers
>;   browseable = yes
>;   read only = yes
>;   guest ok = no
># Uncomment to allow remote administration of Windows print drivers.
># Replace 'ntadmin' with the name of the group your admin users are
># members of.
>;   write list = root, @ntadmin
>
># A sample share for sharing your CD-ROM with others.
>;[cdrom]
>;   comment = Samba server's CD-ROM
>;   writable = no
>;   locking = no
>;   path = /cdrom
>;   public = yes
>
># The next two parameters show how to auto-mount a CD-ROM when the
>#       cdrom share is accesed. For this to work /etc/fstab must contain
>#       an entry like this:
>#
>#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
>#
># The CD-ROM gets unmounted automatically after the connection to the
>#
># If you don't want to use auto-mounting/unmounting make sure the CD
>#       is mounted on /cdrom
>#
>;   preexec = /bin/mount /cdrom
>;   postexec = /bin/umount /cdrom
>
># Wolfgang: share the directory /NAS
>[all]
> comment = Servers all NAS
> browseable = yes
> writable = yes
> locking = no
> path = /NAS/share-crypt/all
> public = no
> valid users = @share
> force group = share
>
>[photos]
> comment = Servers photos NAS
> browseable = yes
> writable = yes
> locking = no
> path = /NAS/share-photos
> public = no
> valid users = @share
> force group = share
>

Actions: View

Attachments on bug 6202: 4001 | 4002 | 4003 | 4004 | 4005