The Samba-Bugzilla – Attachment 17316 Details for
Bug 15084
from Kubuntu 22.04 to Kubuntu 22.04 samba share not visible
Home
|
New
|
Browse
|
Search
|
[?]
|
Reports
|
Requests
|
Help
|
New Account
|
Log In
[x]
|
Forgot Password
Login:
[x]
smb.conf from Kubuntu 22.04
smb.conf (text/plain), 9.32 KB, created by
mpetit987
on 2022-06-02 03:49:37 UTC
(
hide
)
Description:
smb.conf from Kubuntu 22.04
Filename:
MIME Type:
Creator:
mpetit987
Created:
2022-06-02 03:49:37 UTC
Size:
9.32 KB
patch
obsolete
># ># Sample configuration file for the Samba suite for Debian GNU/Linux. ># ># ># This is the main Samba configuration file. You should read the ># smb.conf(5) manual page in order to understand the options listed ># here. Samba has a huge number of configurable options most of which ># are not shown in this example ># ># Some options that are often worth tuning have been included as ># commented-out examples in this file. ># - When such options are commented with ";", the proposed setting ># differs from the default Samba behaviour ># - When commented with "#", the proposed setting is the default ># behaviour of Samba but the option is considered important ># enough to be mentioned here ># ># NOTE: Whenever you modify this file you should run the command ># "testparm" to check that you have not made any basic syntactic ># errors. > >#======================= Global Settings ======================= > >[global] > >## Browsing/Identification ### > ># Change this to the workgroup/NT-domain name your Samba server will part of > unix charset = UTF-8 > workgroup = HOME > #client max protocol = NT1 > #wins support = yes > #dns proxy = yes > #name resolve order = lmhosts host wins bcast ># server string is the equivalent of the NT Description field > server string = %h server (Samba, Ubuntu) > >#### Networking #### > ># The specific set of interfaces / networks to bind to ># This can be either the interface name or an IP address/netmask; ># interface names are normally preferred >; interfaces = 127.0.0.0/8 eth0 > ># Only bind to the named interfaces and/or networks; you must use the ># 'interfaces' option above to use this. ># It is recommended that you enable this feature if your Samba machine is ># not protected by a firewall or is a firewall itself. However, this ># option cannot handle dynamic or non-broadcast interfaces correctly. >; bind interfaces only = yes > > > >#### Debugging/Accounting #### > ># This tells Samba to use a separate log file for each machine ># that connects > log file = /var/log/samba/log.%m > log level = 1 ># Cap the size of the individual log files (in KiB). > max log size = 1000 > ># We want Samba to only log to /var/log/samba/log.{smbd,nmbd}. ># Append syslog@1 if you want important messages to be sent to syslog too. > logging = file > ># Do something sensible when Samba crashes: mail the admin a backtrace > panic action = /usr/share/samba/panic-action %d > > >####### Authentication ####### > ># Server role. Defines in which mode Samba will operate. Possible ># values are "standalone server", "member server", "classic primary ># domain controller", "classic backup domain controller", "active ># directory domain controller". ># ># Most people will want "standalone server" or "member server". ># Running as "active directory domain controller" will require first ># running "samba-tool domain provision" to wipe databases and create a ># new domain. > server role = standalone server > > obey pam restrictions = yes > ># This boolean parameter controls whether Samba attempts to sync the Unix ># password with the SMB password when the encrypted SMB password in the ># passdb is changed. > unix password sync = yes > ># For Unix password sync to work on a Debian GNU/Linux system, the following ># parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for ># sending the correct chat script for the passwd program in Debian Sarge). > passwd program = /usr/bin/passwd %u > passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . > ># This boolean controls whether PAM will be used for password changes ># when requested by an SMB client instead of the program listed in ># 'passwd program'. The default is 'no'. > pam password change = yes > ># This option controls how unsuccessful authentication attempts are mapped ># to anonymous connections > map to guest = bad user > >########## Domains ########### > ># ># The following settings only takes effect if 'server role = classic ># primary domain controller', 'server role = classic backup domain controller' ># or 'domain logons' is set ># > ># It specifies the location of the user's ># profile directory from the client point of view) The following ># required a [profiles] share to be setup on the samba server (see ># below) >; logon path = \\%N\profiles\%U ># Another common choice is storing the profile in the user's home directory ># (this is Samba's default) ># logon path = \\%N\%U\profile > ># The following setting only takes effect if 'domain logons' is set ># It specifies the location of a user's home directory (from the client ># point of view) >; logon drive = H: ># logon home = \\%N\%U > ># The following setting only takes effect if 'domain logons' is set ># It specifies the script to run during logon. The script must be stored ># in the [netlogon] share ># NOTE: Must be store in 'DOS' file format convention >; logon script = logon.cmd > ># This allows Unix users to be created on the domain controller via the SAMR ># RPC pipe. The example command creates a user account with a disabled Unix ># password; please adapt to your needs >; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u > ># This allows machine accounts to be created on the domain controller via the ># SAMR RPC pipe. ># The following assumes a "machines" group exists on the system >; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u > ># This allows Unix groups to be created on the domain controller via the SAMR ># RPC pipe. >; add group script = /usr/sbin/addgroup --force-badname %g > >############ Misc ############ > ># Using the following line enables you to customise your configuration ># on a per machine basis. The %m gets replaced with the netbios name ># of the machine that is connecting >; include = /home/samba/etc/smb.conf.%m > ># Some defaults for winbind (make sure you're not using the ranges ># for something else.) >; idmap config * : backend = tdb >; idmap config * : range = 3000-7999 >; idmap config YOURDOMAINHERE : backend = tdb >; idmap config YOURDOMAINHERE : range = 100000-999999 >; template shell = /bin/bash > ># Setup usershare options to enable non-root users to share folders ># with the net usershare command. > ># Maximum number of usershare. 0 means that usershare is disabled. ># usershare max shares = 100 > ># Allow users who've been granted usershare privileges to create ># public shares, not just authenticated ones > usershare allow guests = yes > >#======================= Share Definitions ======================= > ># Un-comment the following (and tweak the other settings below to suit) ># to enable the default home directory shares. This will share each ># user's home directory as \\server\username >;[homes] >; comment = Home Directories >; browseable = no > ># By default, the home directories are exported read-only. Change the ># next parameter to 'no' if you want to be able to write to them. >; read only = yes > ># File creation mask is set to 0700 for security reasons. If you want to ># create files with group=rw permissions, set next parameter to 0775. >; create mask = 0700 > ># Directory creation mask is set to 0700 for security reasons. If you want to ># create dirs. with group=rw permissions, set next parameter to 0775. >; directory mask = 0700 > ># By default, \\server\username shares can be connected to by anyone ># with access to the samba server. ># Un-comment the following parameter to make sure that only "username" ># can connect to \\server\username ># This might need tweaking when using external authentication schemes >; valid users = %S > ># Un-comment the following and create the netlogon directory for Domain Logons ># (you need to configure Samba to act as a domain controller too.) >;[netlogon] >; comment = Network Logon Service >; path = /home/samba/netlogon >; guest ok = yes >; read only = yes > ># Un-comment the following and create the profiles directory to store ># users profiles (see the "logon path" option above) ># (you need to configure Samba to act as a domain controller too.) ># The path below should be writable by all users so that their ># profile directory may be created the first time they log on >;[profiles] >; comment = Users profiles >; path = /home/samba/profiles >; guest ok = no >; browseable = no >; create mask = 0600 >; directory mask = 0700 > >[printers] > comment = All Printers > browseable = no > path = /var/spool/samba > printable = yes > guest ok = no > read only = yes > create mask = 0700 > ># Windows clients look for this share name as a source of downloadable ># printer drivers >[print$] > comment = Printer Drivers > path = /var/lib/samba/printers > browseable = yes > read only = yes > guest ok = no ># Uncomment to allow remote administration of Windows print drivers. ># You may need to replace 'lpadmin' with the name of the group your ># admin users are members of. ># Please note that you also need to set appropriate Unix permissions ># to the drivers directory for these users to have write rights in it >; write list = root, @lpadmin >[home] > path = /home > guest ok = yes > writeable = yes > guest only = yes > force create mode = 775 > force directory mode = 775 > >[etc] > path = /etc > guest ok = yes > writeable = yes > guest only = yes > force create mode = 775 > force directory mode = 775 > >#[privateshare] ># path = /smb-private ># writable = yes ># guest ok = no ># valid users = @smbinternal ># force create mode = 770 ># force directory mode = 770 ># inherit permissions = yes > >
You cannot view the attachment while viewing its details because your browser does not support IFRAMEs.
View the attachment on a separate page
.
View Attachment As Raw
Actions:
View
Attachments on
bug 15084
: 17316