Collected config --- 2019-06-27-15:33 ----------- Hostname: test DNS Domain: friskdemo.local FQDN: test.friskdemo.local ipaddress: 10.10.11.14 ----------- Samba is running as an Unix domain member but 'winbindd' is NOT running. Check that the winbind package is installed. Detected, Samba is running winbind only. Auth-only server, Unix domain member Checking file: /etc/os-release PRETTY_NAME="Debian GNU/Linux 9 (stretch)" NAME="Debian GNU/Linux" VERSION_ID="9" VERSION="9 (stretch)" ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" ----------- This computer is running Debian 9.9 x86_64 ----------- running command : ip a 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host 2: ens192: mtu 1500 qdisc mq master bond0 state UP group default qlen 1000 link/ether 00:50:56:aa:d5:25 brd ff:ff:ff:ff:ff:ff 3: bond0: mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 00:50:56:aa:d5:25 brd ff:ff:ff:ff:ff:ff inet 10.10.11.14/24 brd 10.10.11.255 scope global bond0 inet6 fe80::250:56ff:feaa:d525/64 scope link ----------- Checking file: /etc/hosts 127.0.0.1 localhost 127.0.1.1 test.friskdemo.local test # The following lines are desirable for IPv6 capable hosts ::1 localhost ip6-localhost ip6-loopback ff02::1 ip6-allnodes ff02::2 ip6-allrouters ----------- Checking file: /etc/resolv.conf domain friskdemo.local ###frisk: workgroup friskdemo nameserver 127.0.0.1 nameserver 10.10.11.1 ----------- Checking file: /etc/krb5.conf [libdefaults] default_realm = FRISKDEMO.LOCAL default_keytab_name = FILE:/etc/krb5.keytab krb4_config = /etc/krb.conf krb4_realms = /etc/krb.realms kdc_timesync = 1 ccache_type = 4 forwardable = true proxiable = true [domain_realm] FRISKDEMO = FRISKDEMO.LOCAL friskdemo.local = FRISKDEMO.LOCAL .friskdemo.local = FRISKDEMO.LOCAL [login] krb4_convert = true krb4_get_tickets = false [appdefaults] kinit = { renewable = true fowardable = true } ----------- Checking file: /etc/nsswitch.conf # /etc/nsswitch.conf # # Example configuration of GNU Name Service Switch functionality. # If you have the `glibc-doc-reference' and `info' packages installed, try: # `info libc "Name Service Switch"' for information about this file. passwd: compat group: compat shadow: compat gshadow: files hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis ----------- Checking file: /etc/samba/smb.conf # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example # # Some options that are often worth tuning have been included as # commented-out examples in this file. # - When such options are commented with ";", the proposed setting # differs from the default Samba behaviour # - When commented with "#", the proposed setting is the default # behaviour of Samba but the option is considered important # enough to be mentioned here # # NOTE: Whenever you modify this file you should run the command # "testparm" to check that you have not made any basic syntactic # errors. #======================= Global Settings ======================= [global] ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of workgroup = FRISKDEMO realm = FRISKDEMO.LOCAL include = /etc/samba/frisk-krb5.conf ldap timeout = 300 # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server # wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS. dns proxy = no #### Networking #### # The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0 # Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself. However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ; bind interfaces only = yes #### Debugging/Accounting #### # This tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Cap the size of the individual log files (in KiB). ; max log size = 1000 # If you want Samba to only log through syslog then set the following # parameter to 'yes'. # syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. syslog = 0 # Do something sensible when Samba crashes: mail the admin a backtrace panic action = /usr/share/samba/panic-action %d ####### Authentication ####### # Server role. Defines in which mode Samba will operate. Possible # values are "standalone server", "member server", "classic primary # domain controller", "classic backup domain controller", "active # directory domain controller". # # Most people will want "standalone sever" or "member server". # Running as "active directory domain controller" will require first # running "samba-tool domain provision" to wipe databases and create a # new domain. server role = standalone server # If you are using encrypted passwords, Samba will need to know what # password database type you are using. passdb backend = tdbsam obey pam restrictions = yes # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. ; unix password sync = yes # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan < for # sending the correct chat script for the passwd program in Debian Sarge). ; passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. ; pam password change = yes # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections ; map to guest = bad user ########## Domains ########### # # The following settings only takes effect if 'server role = primary # classic domain controller', 'server role = backup domain controller' # or 'domain logons' is set # # It specifies the location of the user's # profile directory from the client point of view) The following # required a [profiles] share to be setup on the samba server (see # below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Some defaults for winbind (make sure you're not using the ranges # for something else.) idmap config * : range = 10000-4000000000 idmap config * : backend = tdb ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones ; usershare allow guests = yes #======================= Share Definitions ======================= [homes] comment = Home Directories browseable = no # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. read only = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. directory mask = 0700 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. # The following parameter makes sure that only "username" can connect # to \\server\username # This might need tweaking when using external authentication schemes valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 ;[printers] ; comment = All Printers ; browseable = no ; path = /var/spool/samba ; printable = yes ; guest ok = no ; read only = yes ; create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers ;[print$] ; comment = Printer Drivers ; path = /var/lib/samba/printers ; browseable = yes ; read only = yes ; guest ok = no ;# Uncomment to allow remote administration of Windows print drivers. ;# You may need to replace 'lpadmin' with the name of the group your ;# admin users are members of. ;# Please note that you also need to set appropriate Unix permissions ;# to the drivers directory for these users to have write rights in it ;; write list = root, @lpadmin ----------- Running as Unix domain member and no user.map detected. This is possible with an auth-only setup, checking also for NFS parts ----------- Checking file: /etc/idmapd.conf [General] Verbosity = 0 Pipefs-Directory = /run/rpc_pipefs # set your own domain here, if it differs from FQDN minus hostname # Domain = localdomain [Mapping] Nobody-User = nobody Nobody-Group = nogroup ----------- Installed packages: ii krb5-config 2.6 all Configuration files for Kerberos Version 5 ii krb5-user 1.15-1+deb9u1 amd64 basic programs to authenticate using MIT Kerberos ii libacl1:amd64 2.2.52-3+b1 amd64 Access control list shared library ii libattr1:amd64 1:2.4.47-2+b2 amd64 Extended attribute shared library ii libgssapi-krb5-2:amd64 1.15-1+deb9u1 amd64 MIT Kerberos runtime libraries - krb5 GSS-API Mechanism ii libkrb5-3:amd64 1.15-1+deb9u1 amd64 MIT Kerberos runtime libraries ii libkrb5support0:amd64 1.15-1+deb9u1 amd64 MIT Kerberos runtime libraries - Support library ii libnfsidmap2:amd64 0.25-5.1 amd64 NFS idmapping library ii libnss-winbind:amd64 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 Samba nameservice integration plugins ii libpam-winbind:amd64 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 Windows domain authentication integration plugin ii libsmbclient:amd64 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 shared library for communication with SMB/CIFS servers ii libwbclient0:amd64 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 Samba winbind client library ii nfs-common 1:1.3.4-2.1 amd64 NFS support files common to client and server ii python-samba 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 Python bindings for Samba ii samba-common 2:4.5.16+dfsg-1+deb9u2+frisk1 all common files used by both the Samba server and client ii samba-common-bin 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 Samba common files used by both the server and the client ii samba-dsdb-modules 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 Samba Directory Services Database ii samba-libs:amd64 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 Samba core libraries ii smbclient 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 command-line SMB/CIFS clients for Unix ii winbind 2:4.5.16+dfsg-1+deb9u2+frisk1 amd64 service to resolve user and group information from Windows NT servers -----------