Attachment 11278 Details for Bug 11407 – smb.conf from the server

smb.conf from the server

smb.conf (text/plain), 9.78 KB, created by Dariusz Gadomski on 2015-07-21 12:02:15 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dariusz Gadomski

Created: 2015-07-21 12:02:15 UTC

Size: 9.78 KB

patch

obsolete

>#
># Sample configuration file for the Samba suite for Debian GNU/Linux.
>#
>#
># This is the main Samba configuration file. You should read the
># smb.conf(5) manual page in order to understand the options listed
># here. Samba has a huge number of configurable options most of which 
># are not shown in this example
>#
># Some options that are often worth tuning have been included as
># commented-out examples in this file.
>#  - When such options are commented with ";", the proposed setting
>#    differs from the default Samba behaviour
>#  - When commented with "#", the proposed setting is the default
>#    behaviour of Samba but the option is considered important
>#    enough to be mentioned here
>#
># NOTE: Whenever you modify this file you should run the command
># "testparm" to check that you have not made any basic syntactic 
># errors. 
>
>#======================= Global Settings =======================
>
>[global]
>
>## Browsing/Identification ###
>
># Change this to the workgroup/NT-domain name your Samba server will part of
>   workgroup = WORKGROUP
>
># server string is the equivalent of the NT Description field
>	server string = %h server (Samba, Ubuntu)
>
># Windows Internet Name Serving Support Section:
># WINS Support - Tells the NMBD component of Samba to enable its WINS Server
>#   wins support = no
>
># WINS Server - Tells the NMBD components of Samba to be a WINS Client
># Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
>;   wins server = w.x.y.z
>
># This will prevent nmbd to search for NetBIOS names through DNS.
>   dns proxy = no
>
>#### Networking ####
>
># The specific set of interfaces / networks to bind to
># This can be either the interface name or an IP address/netmask;
># interface names are normally preferred
>;   interfaces = 127.0.0.0/8 eth0
>
># Only bind to the named interfaces and/or networks; you must use the
># 'interfaces' option above to use this.
># It is recommended that you enable this feature if your Samba machine is
># not protected by a firewall or is a firewall itself.  However, this
># option cannot handle dynamic or non-broadcast interfaces correctly.
>;   bind interfaces only = yes
>
>
>
>#### Debugging/Accounting ####
>
># This tells Samba to use a separate log file for each machine
># that connects
>   log file = /var/log/samba/log.%m
>
># Cap the size of the individual log files (in KiB).
>   max log size = 1000
>
># If you want Samba to only log through syslog then set the following
># parameter to 'yes'.
>#   syslog only = no
>
># We want Samba to log a minimum amount of information to syslog. Everything
># should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
># through syslog you should set the following parameter to something higher.
>   syslog = 0
>
># Do something sensible when Samba crashes: mail the admin a backtrace
>   panic action = /usr/share/samba/panic-action %d
>
>
>####### Authentication #######
>
># Server role. Defines in which mode Samba will operate. Possible
># values are "standalone server", "member server", "classic primary
># domain controller", "classic backup domain controller", "active
># directory domain controller". 
>#
># Most people will want "standalone sever" or "member server".
># Running as "active directory domain controller" will require first
># running "samba-tool domain provision" to wipe databases and create a
># new domain.
>   server role = standalone server
>
># If you are using encrypted passwords, Samba will need to know what
># password database type you are using.  
>;   passdb backend = tdbsam
>   passdb backend = ldapsam:ldapi:///
>   ldap suffix = dc=example,dc=com
>   ldap user suffix = ou=People
>   ldap group suffix = ou=Groups
>   ;ldap machine suffix = ou=Computers
>   ;ldap idmap suffix = ou=Idmap
>   ldap admin dn = cn=admin,dc=example,dc=com
>   ;ldap ssl = start tls
>   ldap ssl = no
>   ldap passwd sync = yes
>   add machine script = sudo /usr/sbin/smbldap-useradd -t 0 -w "%u"
>   obey pam restrictions = yes
>
># This boolean parameter controls whether Samba attempts to sync the Unix
># password with the SMB password when the encrypted SMB password in the
># passdb is changed.
>   unix password sync = yes
>
># For Unix password sync to work on a Debian GNU/Linux system, the following
># parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
># sending the correct chat script for the passwd program in Debian Sarge).
>   passwd program = /usr/bin/passwd %u
>   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
>
># This boolean controls whether PAM will be used for password changes
># when requested by an SMB client instead of the program listed in
># 'passwd program'. The default is 'no'.
>   pam password change = yes
>
># This option controls how unsuccessful authentication attempts are mapped
># to anonymous connections
>   map to guest = bad user
>
>########## Domains ###########
>
>#
># The following settings only takes effect if 'server role = primary
># classic domain controller', 'server role = backup domain controller'
># or 'domain logons' is set 
>#
>
># It specifies the location of the user's
># profile directory from the client point of view) The following
># required a [profiles] share to be setup on the samba server (see
># below)
>;   logon path = \\%N\profiles\%U
># Another common choice is storing the profile in the user's home directory
># (this is Samba's default)
>#   logon path = \\%N\%U\profile
>
># The following setting only takes effect if 'domain logons' is set
># It specifies the location of a user's home directory (from the client
># point of view)
>;   logon drive = H:
>#   logon home = \\%N\%U
>
># The following setting only takes effect if 'domain logons' is set
># It specifies the script to run during logon. The script must be stored
># in the [netlogon] share
># NOTE: Must be store in 'DOS' file format convention
>;   logon script = logon.cmd
>
># This allows Unix users to be created on the domain controller via the SAMR
># RPC pipe.  The example command creates a user account with a disabled Unix
># password; please adapt to your needs
>; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
>
># This allows machine accounts to be created on the domain controller via the 
># SAMR RPC pipe.  
># The following assumes a "machines" group exists on the system
>; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
>
># This allows Unix groups to be created on the domain controller via the SAMR
># RPC pipe.  
>; add group script = /usr/sbin/addgroup --force-badname %g
>
>############ Misc ############
>
># Using the following line enables you to customise your configuration
># on a per machine basis. The %m gets replaced with the netbios name
># of the machine that is connecting
>;   include = /home/samba/etc/smb.conf.%m
>
># Some defaults for winbind (make sure you're not using the ranges
># for something else.)
>;   idmap uid = 10000-20000
>;   idmap gid = 10000-20000
>;   template shell = /bin/bash
>
># Setup usershare options to enable non-root users to share folders
># with the net usershare command.
>
># Maximum number of usershare. 0 (default) means that usershare is disabled.
>;   usershare max shares = 100
>
># Allow users who've been granted usershare privileges to create
># public shares, not just authenticated ones
>   usershare allow guests = yes
>
>#======================= Share Definitions =======================
>
># Un-comment the following (and tweak the other settings below to suit)
># to enable the default home directory shares. This will share each
># user's home directory as \\server\username
>[homes]
>   comment = Home Directories
>   browseable = yes
>
># By default, the home directories are exported read-only. Change the
># next parameter to 'no' if you want to be able to write to them.
>;   read only = yes
>
># File creation mask is set to 0700 for security reasons. If you want to
># create files with group=rw permissions, set next parameter to 0775.
>;   create mask = 0700
>
># Directory creation mask is set to 0700 for security reasons. If you want to
># create dirs. with group=rw permissions, set next parameter to 0775.
>;   directory mask = 0700
>
># By default, \\server\username shares can be connected to by anyone
># with access to the samba server.
># Un-comment the following parameter to make sure that only "username"
># can connect to \\server\username
># This might need tweaking when using external authentication schemes
>;   valid users = %S
>
># Un-comment the following and create the netlogon directory for Domain Logons
># (you need to configure Samba to act as a domain controller too.)
>;[netlogon]
>;   comment = Network Logon Service
>;   path = /home/samba/netlogon
>;   guest ok = yes
>;   read only = yes
>
># Un-comment the following and create the profiles directory to store
># users profiles (see the "logon path" option above)
># (you need to configure Samba to act as a domain controller too.)
># The path below should be writable by all users so that their
># profile directory may be created the first time they log on
>;[profiles]
>;   comment = Users profiles
>;   path = /home/samba/profiles
>;   guest ok = no
>;   browseable = no
>;   create mask = 0600
>;   directory mask = 0700
>
>[printers]
>   comment = All Printers
>   browseable = no
>   path = /var/spool/samba
>   printable = yes
>   guest ok = no
>   read only = yes
>   create mask = 0700
>
># Windows clients look for this share name as a source of downloadable
># printer drivers
>[print$]
>   comment = Printer Drivers
>   path = /var/lib/samba/printers
>   browseable = yes
>   read only = yes
>   guest ok = no
># Uncomment to allow remote administration of Windows print drivers.
># You may need to replace 'lpadmin' with the name of the group your
># admin users are members of.
># Please note that you also need to set appropriate Unix permissions
># to the drivers directory for these users to have write rights in it
>;   write list = root, @lpadmin
>
>[share]
>  path = /srv/share
>  browsable = yes
>  writeable = yes
>  guest ok = yes

Actions: View

Attachments on bug 11407: 11277 | 11278 | 11299